How to Replace the Motherboard on your Seaga HY900/2100 Vending Machine

5 views 0 March 9, 2021 April 16, 2021 admin

  2. Remove the Mother Board
    1. Disconnect the wires from the Mother Board
      1. Pull the plastic on the wire harnesses to disconnect them
      2. Ribbon Wires you have to unlock the two black locking mechanisms, then it will pretty much fall out
    2. Remove the 4 7mm nuts on the 4 corners
  3. Install New Mother Board
    1. Put the board in and tighten in the 4 nuts
    2. Put the Wire Harnesses back into the Board

Was this helpful?

 
Related Articles
Supportscreen tag